§ 1.482-1(e)26 CFR Part 1

Arm's length range

Arm's length range—(1) In general. In some cases, application of a pricing method will produce a single result that is the most reliable measure of an arm's length result. In other cases, application ...

Cite as:Treas. Reg. § 1.482-1(e)

Full Text

(e)Arm's length range—(1) In general. In some cases, application of a pricing method will produce a single result that is the most reliable measure of an arm's length result. In other cases, application of a method may produce a number of results from which a range of reliable results may be derived. A taxpayer will not be subject to adjustment if its results fall within such range (arm's length range).

(2)Determination of arm's length range—(i) Single method. The arm's length range is ordinarily determined by applying a single pricing method selected under the best method rule to two or more uncontrolled transactions of similar comparability and reliability. Use of more than one method may be appropriate for the purposes described in paragraph (c)(2)(iii) of this section (Best method rule).

(ii)Selection of comparables. Uncontrolled comparables must be selected based upon the comparability criteria relevant to the method applied and must be sufficiently similar to the controlled transaction that they provide a reliable measure of an arm's length result. If material differences exist between the controlled and uncontrolled transactions, adjustments must be made to the results of the uncontrolled transaction if the effect of such differences on price or profits can be ascertained with sufficient accuracy to improve the reliability of the results. See § 1.482-1(d)(2) (Standard of comparability). The arm's length range will be derived only from those uncontrolled comparables that have, or through adjustments can be brought to, a similar level of comparability and reliability, and uncontrolled comparables that have a significantly lower level of comparability and reliability will not be used in establishing the arm's length range.

(iii)Comparables included in arm's length range—(A) In general. The arm's length range will consist of the results of all of the uncontrolled comparables that meet the following conditions: the information on the controlled transaction and the uncontrolled comparables is sufficiently complete that it is likely that all material differences have been identified, each such difference has a definite and reasonably ascertainable effect on price or profit, and an adjustment is made to eliminate the effect of each such difference.

(B)Adjustment of range to increase reliability. If there are no uncontrolled comparables described in paragraph (e)(2)(iii)(A) of this section, the arm's length range is derived from the results of all the uncontrolled comparables, selected pursuant to paragraph (e)(2)(ii) of this section, that achieve a similar level of comparability and reliability. In such cases the reliability of the analysis must be increased, where it is possible to do so, by adjusting the range through application of a valid statistical method to the results of all of the uncontrolled comparables so selected. The reliability of the analysis is increased when statistical methods are used to establish a range of results in which the limits of the range will be determined such that there is a 75 percent probability of a result falling above the lower end of the range and a 75 percent probability of a result falling below the upper end of the range. The interquartile range ordinarily provides an acceptable measure of this range; however a different statistical method may be applied if it provides a more reliable measure.

(C)Interquartile range. For purposes of this section, the interquartile range is the range from the 25th to the 75th percentile of the results derived from the uncontrolled comparables. For this purpose, the 25th percentile is the lowest result derived from an uncontrolled comparable such that at least 25 percent of the results are at or below the value of that result. However, if exactly 25 percent of the results are at or below a result, then the 25th percentile is equal to the average of that result and the next higher result derived from the uncontrolled comparables. The 75th percentile is determined analogously.

(3)Adjustment if taxpayer's results are outside arm's length range. If the results of a controlled transaction fall outside the arm's length range, the district director may make allocations that adjust the controlled taxpayer's result to any point within the arm's length range. If the interquartile range is used to determine the arm's length range, such adjustment will ordinarily be to the median of all the results. The median is the 50th percentile of the results, which is determined in a manner analogous to that described in paragraph (e)(2)(iii)(C) of this section (Interquartile range). In other cases, an adjustment normally will be made to the arithmetic mean of all the results. See § 1.482-1(f)(2)(iii)(D) for determination of an adjustment when a controlled taxpayer's result for a multiple year period falls outside an arm's length range consisting of the average results of uncontrolled comparables over the same period.

(4)Arm's length range not prerequisite to allocation. The rules of this paragraph (e) do not require that the district director establish an arm's length range prior to making an allocation under section 482. Thus, for example, the district director may properly propose an allocation on the basis of a single comparable uncontrolled price if the comparable uncontrolled price method, as described in § 1.482-3(b), has been properly applied. However, if the taxpayer subsequently demonstrates that the results claimed on its income tax return are within the range established by additional equally reliable comparable uncontrolled prices in a manner consistent with the requirements set forth in § 1.482-1(e)(2)(iii), then no allocation will be made.

(5)Examples. The following examples illustrate the principles of this paragraph (e).

Example 1. Selection of comparables.(i) To evaluate the arm's length result of a controlled transaction between USSub, the United States taxpayer under review, and FP, its foreign parent, the district director considers applying the resale price method. The district director identifies ten potential uncontrolled transactions. The distributors in all ten uncontrolled transactions purchase and resell similar products and perform similar functions to those of USSub. (ii) Data with respect to three of the uncontrolled transactions is very limited, and although some material differences can be identified and adjusted for, the level of comparability of these three uncontrolled comparables is significantly lower than that of the other seven. Further, of those seven, adjustments for the identified material differences can be reliably made for only four of the uncontrolled transactions. Therefore, pursuant to § 1.482-1(e)(2)(ii) only these four uncontrolled comparables may be used to establish an arm's length range.

Example 2. Arm's length range consists of all the results.(i) The facts are the same as in Example 1. Applying the resale price method to the four uncontrolled comparables, and making adjustments to the uncontrolled comparables pursuant to § 1.482-1(d)(2), the district director derives the following results:

Comparable	Result (price)
1	$44.00
2	45.00
3	45.00
4	45.50

Example 2. Arm's length range consists of all the results.(ii) The district director determines that data regarding the four uncontrolled transactions is sufficiently complete and accurate so that it is likely that all material differences between the controlled and uncontrolled transactions have been identified, such differences have a definite and reasonably ascertainable effect, and appropriate adjustments were made for such differences. Accordingly, if the resale price method is determined to be the best method pursuant to § 1.482-1(c), the arm's length range for the controlled transaction will consist of the results of all of the uncontrolled comparables, pursuant to paragraph (e)(2)(iii)(A) of this section. Thus, the arm's length range in this case would be the range from $44 to $45.50.

Example 3. Arm's length range limited to interquartile range.(i) The facts are the same as in Example 2, except in this case there are some product and functional differences between the four uncontrolled comparables and USSub. However, the data is insufficiently complete to determine the effect of the differences. Applying the resale price method to the four uncontrolled comparables, and making adjustments to the uncontrolled comparables pursuant to § 1.482-1(d)(2), the district director derives the following results:

Uncontrolled comparable	Result (price)
1	$42.00
2	44.00
3	45.00
4	47.50

Example 3. Arm's length range limited to interquartile range.(ii) It cannot be established in this case that all material differences are likely to have been identified and reliable adjustments made for those differences. Accordingly, if the resale price method is determined to be the best method pursuant to § 1.482-1(c), the arm's length range for the controlled transaction must be established pursuant to paragraph (e)(2)(iii)(B) of this section. In this case, the district director uses the interquartile range to determine the arm's length range, which is the range from $43 to $46.25. If USSub's price falls outside this range, the district director may make an allocation. In this case that allocation would be to the median of the results, or $44.50.

Example 4. Arm's length range limited to interquartile range.(i) To evaluate the arm's length result of controlled transactions between USP, a United States manufacturing company, and FSub, its foreign subsidiary, the district director considers applying the comparable profits method. The district director identifies 50 uncontrolled taxpayers within the same industry that potentially could be used to apply the method. (ii) Further review indicates that only 20 of the uncontrolled manufacturers engage in activities requiring similar capital investments and technical know-how. Data with respect to five of the uncontrolled manufacturers is very limited, and although some material differences can be identified and adjusted for, the level of comparability of these five uncontrolled comparables is significantly lower than that of the other 15. In addition, for those five uncontrolled comparables it is not possible to accurately allocate costs between the business activity associated with the relevant transactions and other business activities. Therefore, pursuant to § 1.482-1(e)(2)(ii) only the other fifteen uncontrolled comparables may be used to establish an arm's length range. (iii) Although the data for the fifteen remaining uncontrolled comparables is relatively complete and accurate, there is a significant possibility that some material differences may remain. The district director has determined, for example, that it is likely that there are material differences in the level of technical expertise or in management efficiency. Accordingly, if the comparable profits method is determined to be the best method pursuant to § 1.482-1(c), the arm's length range for the controlled transaction may be established only pursuant to paragraph (e)(2)(iii)(B) of this section.

Source: 26 CFR § 1.482-1 via Electronic Code of Federal Regulations (eCFR)